Follow

nIO 1S: What Is "Broadcast Analog Input" Mode For The nIO 1S?

The nIO 1S can be set to "Broadcast Analog Input" Mode, which will accept a 0-10V dimming from a 3rd party device and broadcast it over the selected Photocell Channel.

For a dimming relay or power pack controller to track the nIO 1S analog input, the controller's "Follow Photocell Mode" has to be set to "Enabled - Both Positive and Negative".

If one looks at Control Channels in SensorView,  the nIO 1S will show as broadcasting in both switch and photocell channels.  The nIO 1S will broadcast over a Switch Channel when the mode is set to "Wallpod".

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk