Follow

nEPP5 D: Can I Power The nEPP5 D Using 208/240VAC (2 Hot Phases Of 110VAC)?

Yes, see drawing below.  The nEPP5 D can be powered using 208/240VAC.  Wire Phase A to one of the black wires and phase B to the white wire.  The other black wire and dimming wires will go to the load.  Please note:

-Only the phase wired to the black wire will be switching on/off.  The phase wired to the white wire will remain hot.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk