How do I troubleshoot a Sweep Switch?

Sweep switch Trouble Shooting

First make sure there is enough load on the switch. Ask the caller for the model number.  If they do not have enough load the toggle switch will not drop out when the relay is open. 

First, manually override the lights off. Does the relay stay off for 8 seconds?

If yes, check to make sure they used the right switch for the load.

If no, make sure that the Relay is set up in the programming as a Sweep Relay.

If the relay stills does not stay off for 8 Seconds then check the relay by swapping it with another one.

Does it work

Yes, then Make sure Switch drops out and you are done.

If No,  Replace the Relay Module.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk