Follow

Dual Technology (PDT) Sensors: How Do I Adjust the Microphone Programming?

NOTE:  This option is only available on sensors with "PDT" in the model number.

1. Push and hold button down until LED flashes rapidly, and then release the button.

2. Press the button again for 12 times.

3. LED will flash indicating the current Microphone Setting:

1 Flash Enabled
2 Flashes Disabled
3 Flashes 1/2 Sensitivity


4. Press Button the number of times for the desired setting:

1 Time Enabled
2 Times Disabled
3 Times 1/2 Sensitivity


5. LED will flash indicating the current Microphone Setting: (will repeat up to 10 times)

1 Flash Enabled
2 Flashes Disabled
3 Flashes 1/2 Sensitivity


6. Push and hold down the button until the LED flashes rapidly, and then release the button.

7. Press the button again for 12 times to EXIT Microphone setting.

8. LED will flash twice indicating acceptance of the NEW Setting.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk